软管泵拦水带成型机多种规格可选

更换泵管操作步骤：
将连接泵进出口的管道拆开，并将冷却液放出。将进出口管夹内六角螺栓（各四个）拧下。短接管及管卡取出。将进出口前接管螺栓旋出，将前接管、压环及密封圈取出。启动电机，使电机顺时针旋转，将软管拉出。启动电机，使电机逆时针旋转。将新软管一侧涂少量润滑脂（黄油），然后将涂有润滑脂的一侧向泵壳壁，从泵壳上方插入至泵壳中，直至软管到泵壳下方出口的合适位置，停电机。将密封圈套至软管下口泵接管内，将压环装入，拧紧前接管螺栓，装入管夹，拧紧管夹螺栓。启动电机，使电机逆时针旋转，用手或橡胶板堵住软管上方口，软管全自行进入泵中，通过泵侧面窗口观察，使软管贴到泵壳内壁，停电机，按固定的方式将软管安装好。填加冷却液，软管更换即告完成。

软管泵属于蠕动泵的范畴，主要是由一根特制的橡胶软管，对应泵体内转子总成上的一对压辊，当压辊沿着橡胶软管转动时，压辊与泵壳产生的挤压力将橡胶软管压扁，在软管自身弹性和侧导辊的强制下，通过恢复原状产生的真空吸入流体物料，物料在压辊的机械挤压下从管内排出，如此往复循环，从而达到连续输出物料的目的。

The hose pump belongs to the category of peristaltic pump. It is mainly composed of a special rubber hose corresponding to a pair of pressure rollers on the rotor assembly in the pump body. When the pressure roller rotates along the rubber hose, the pressure roller and the pump housing The squeezing force flattens the rubber hose. Under the elasticity of the hose itself and the force of the side guide rollers, the fluid material is sucked in by the vacuum generated by the original state. The material is discharged from the tube under the mechanical pressure of the pressure roller, and so on. , So as to achieve the purpose of continuous output of materials.